Servicing Archives - Cessnock Bicycle Company

Tune Derailleur – SRAM T-Type

Steve — Mon, 21 Sep 2026 00:55:50 +0000

For bikes equipped with SRAM T-Type systems only Check derailleur settings and confirm with SRAM technical manual. Adjust derailleur, reset chain tension, torque to 35Nm. Price includes tuning of one derailleur only.

The post Tune Derailleur – SRAM T-Type appeared first on Cessnock Bicycle Company.

RockShox Reverb install + lever bleed

Steve — Tue, 09 Jun 2026 06:22:41 +0000

RockShox Reverb hydraulic droppers were very popular but need regular servicing and a precise bleed procedure to remove air and eliminate ‘seat squish’. Note this service is only for Reverb hydraulic droppers!

The post RockShox Reverb install + lever bleed appeared first on Cessnock Bicycle Company.

Thread Repair – General

Steve — Thu, 20 Nov 2025 02:24:46 +0000

Repair one thread using tap or die.

The post Thread Repair – General appeared first on Cessnock Bicycle Company.

Chain Install – SRAM Transmission

Steve — Thu, 06 Nov 2025 00:35:42 +0000

Installing a SRAM T-Type chain is a simple process but requires complexity in the setup. We check your bike in SRAM’s database and ensure the correct settings for installation gear, setup key and chain length. We follow SRAM’s process to install and check all your tensions are correct.

The post Chain Install – SRAM Transmission appeared first on Cessnock Bicycle Company.

Brake Bed-In (Smart Machine)

Steve — Thu, 05 Jun 2025 05:52:20 +0000

If your brakes are noisy or performing poorly we will run them through a cycle on the machine and see if they come back to life. No more guesswork; they’ll either work correctly or they’ll be replaced. OVER 20% MORE BRAKING PERFORMANCE Parking lot bedding-in cannot compete with the performance from a repeatable program found […]

The post Brake Bed-In (Smart Machine) appeared first on Cessnock Bicycle Company.

Wheel Rebuild – HavacracK

Steve — Mon, 17 Mar 2025 06:18:46 +0000

If your wheel is knackered, we’ll send it off to Trent at HavacraK Wheels for a rim replacement. Trent will replace your rim and put a full set of triple-butted spokes in it, then true and tension. It’ll come back better than new because handbuilt wheels are the best! Price includes spokes and labour but […]

The post Wheel Rebuild – HavacracK appeared first on Cessnock Bicycle Company.

Wheel True – Complex

Steve — Mon, 17 Mar 2025 06:14:06 +0000

If your wheel has big problems we’ll back off all the nipples and start from scratch. Our objective is to true it to 1mm but we might not get there if the rim is damaged. We’ll check all spoke tensions and dish.

The post Wheel True – Complex appeared first on Cessnock Bicycle Company.

Wheel True – Basic

Steve — Mon, 17 Mar 2025 06:13:55 +0000

If your wheel has some small issues, we’ll true it to 1mm. We’ll take out small buckles and bring back that new-wheel feel.

The post Wheel True – Basic appeared first on Cessnock Bicycle Company.

Wax Conversion

Steve — Mon, 17 Mar 2025 06:06:13 +0000

If you’re converting to Waxed chains then this is how we do it in our workshop. First we remove chain and cassette and clean them in the ultrasonic bath. Note we’ll only do this with a new or near-new chain as it’s impossible to get the shite out of an old chain! Once the chain […]

The post Wax Conversion appeared first on Cessnock Bicycle Company.

Tubeless sealant top-up

Steve — Mon, 17 Mar 2025 05:31:38 +0000

Tubeless tyre systems need maintenance! Every six months you should add tubeless sealant to your tubeless tyre to ensure protection. If you’ve had a puncture and the sealant has fixed it, top up the sealant. Annual maintenance: Strip the tyre from the rim and wash everything Check the tape for damage and replace if necessary […]

The post Tubeless sealant top-up appeared first on Cessnock Bicycle Company.