install Archives - Cessnock Bicycle Company

Chain Install – SRAM Transmission

Steve — Thu, 06 Nov 2025 00:35:42 +0000

Installing a SRAM T-Type chain is a simple process but requires complexity in the setup. We check your bike in SRAM’s database and ensure the correct settings for installation gear, setup key and chain length. We follow SRAM’s process to install and check all your tensions are correct.

The post Chain Install – SRAM Transmission appeared first on Cessnock Bicycle Company.

Wax Conversion

Steve — Mon, 17 Mar 2025 06:06:13 +0000

If you’re converting to Waxed chains then this is how we do it in our workshop. First we remove chain and cassette and clean them in the ultrasonic bath. Note we’ll only do this with a new or near-new chain as it’s impossible to get the shite out of an old chain! Once the chain […]

The post Wax Conversion appeared first on Cessnock Bicycle Company.

Suspension Sag test & set

Steve — Mon, 17 Mar 2025 05:15:35 +0000

If you have air suspension in your bike then you’ll need to regularly maintain the air pressure to ensure correct operation. We’ll work with you to set your bike’s suspension sag heights front and rear, and recommend the right pump for regular maintenance.

The post Suspension Sag test & set appeared first on Cessnock Bicycle Company.

Prewax Chain Clean

Steve — Tue, 11 Mar 2025 01:13:52 +0000

If you’re converting to waxed chains then cleaning your chain of factory lubricants or built-up contaminants is critical preparation. If your chain is new, we strip the factory lubricant with a strong hydrocarbon solvent then your chain goes through two cycles in our ultrasonic bath to clean it both externally and internally. After cleaning it’s […]

The post Prewax Chain Clean appeared first on Cessnock Bicycle Company.

Install Wheel Bearings

Steve — Mon, 10 Mar 2025 21:30:31 +0000

Good wheels will require bearing replacement as part of regular servicing. We’ll strip your axle and clean & inspect the cups and cones, then rebuild with new caged roller bearings.

The post Install Wheel Bearings appeared first on Cessnock Bicycle Company.

Install Suspension Bearing

Steve — Mon, 10 Mar 2025 06:53:03 +0000

Changing your suspension linkage bearings is definitely a job for the professionals. We’ll install one bearing in a suspension component and reinstall any linkage hardware around the bearing. Price does not include bearings or pivot hardware.

The post Install Suspension Bearing appeared first on Cessnock Bicycle Company.

Install Rivnut

Steve — Mon, 10 Mar 2025 06:35:10 +0000

Rivnuts are a great way to install a thread into an aluminium or steel frame. We’ll drill a hole and install one rivnut sized 4, 5 or 6mm.

The post Install Rivnut appeared first on Cessnock Bicycle Company.

Install Hydraulic Brake – Complex

Steve — Mon, 10 Mar 2025 05:26:39 +0000

Installing a hydraulic brake system isn’t easy and if your bike needs the hose shortened or the frame has internal hose routing, it’s a job for a professional. We’ll take your new brake and correctly install it to either the front or rear of your bike. We’ll route your hose correctly through your frame and […]

The post Install Hydraulic Brake – Complex appeared first on Cessnock Bicycle Company.

Install Hydraulic Brake – Basic

Steve — Mon, 10 Mar 2025 05:26:31 +0000

Install a hydraulic brake system isn’t easy! We’ll take your new brake and correctly install it to either the front or rear of your bike. We’ll adjust lever position and reach, plus we’ll make sure the caliper is aligned correctly on the disc and that there’s no damaging contact. Please note this basic charge does […]

The post Install Hydraulic Brake – Basic appeared first on Cessnock Bicycle Company.

Install Grips

Steve — Mon, 10 Mar 2025 05:16:38 +0000

Old and sticky grips are the worst! When we change your grips, they’ll be glued in place and aligned correctly – we promise!

The post Install Grips appeared first on Cessnock Bicycle Company.